1. Use the "Cooling Fan Manufacturer" should carefully read the instructions before fully grasp the fans of the structure, performance and installation, use and maintenance methods and precautions.
2. Desktop, floor fans must have a safety ground wire three-pin plugs and sockets; ceiling fan should be installed in the ceiling of a higher position, you can not install the ground wire.
3. "Cooling Fan Manufacturer" of the blades is an important part, both in installation, removal, scrub or use, the need to strengthen the protection to prevent deformation.
4. When operating the function switch, buttons, knobs, action can not be too much, too fast, it can not simultaneously pressing two buttons.
5. The ceiling fan rotation speed control knob should be slow sequence, not screwed in between gear position, or easy to make a ceiling fan heat, burn.
6. After fans with long blades are easily stained following a lot of dust. This is the fan at work, due to the friction between the blade and the air leaving the fan to bring the static nature of the charged objects can attract light and small objects, which can absorb the interior caused by fine dust floating. Fan of oil or fouling, should be promptly removed. Not use gasoline or strong alkaline cleaning, so as not to damage the surface of the paint components function.
7. fans during use if there hot, unusual burning smell, shaking his head not working, speed slows down other faults, do not continue to use, should be promptly cut off the power supply maintenance.
8. Favorite "Cooling Fan Manufacturer" before thoroughly remove surface oil, fouling, and wipe with a soft dry cloth, then wrapped in brown paper or a clean cloth. Storage site should be dry and well ventilated to avoid the squeeze.